Tag Archives: Booster


  1. Soundrebels.com
  2. >
  3. Booster

Furutech NCF Booster Brace-Single English ver.

Opinion 1

Although during the last two years we had the chance of not only listen ourselves, but also share with you our impressions of reviewing anti vibration accessories from the Furutech Booster family, dedicated to protect cables, in fact, the Japanese were working to eliminate parasitic vibrations for much longer. I am not sure if you remember, but already in the summer 2012, eight years ago, the first “ring”, the CF-080 Damping Ring, was presented, creating quite some stir. Frankly speaking, when we invited it for testing, I did not expect two things – the scale of improvement it brought to my system at that time, and even more, the impressive wave of hate I received from audio-sceptic troglodytes, who dragged my, and the manufacturer’s names, through muck and mire. The problem was, that the most fierce opponents cut some pipes and created some self-made devices, which should not work according to their knowledge, or lack of it for the matter, put them on the plugs of their power cables and … they heard something. But this is not the place and time for discussing the truly Homerian clashes of clans differently perceiving the sound. The retrospective had only the goal, to make our less knowledgeable readers, that in Japan the area of combatting vibration is nothing new, and the R&D department of Furutech not only researched the topic thoroughly during the last decade, but in a way returned to the beginnings, offering a new iteration of the old CF-080, the topic of this review called NCF Booster Brace-Single.

Furutech NCF Booster Brace-Single looks incredibly normal and unobtrusive also in terms of their weight and size. Frankly speaking, the old CF-080 looked more like jewelry. But as usual, the looks are deceiving, and our today’s hero as well as its Booster brethren, the plug support NCF Booster and the cable support NCF Booster Signal, carry a lot of proprietary solutions under the hood. The “ordinary” chassis is no plastic, but a proprietary NCF resin (Nano Crystal2 Formula) made from ceramic nanoparticles and carbon dust, having the ability of generating negative ions, which eliminate electrostatic loads, and can transfer heat energy into far infrared. Antivibration abilities are also a result of special carvings of the front panels of the carcass. The side walls are specially sanded and anodized aluminum profiles, where an air chamber is hidden below, stiffened with NCF pillars and beams. I do not know anything about any supernatural abilities of the sticky tape placed on the contact surfaces of the BBS (Booster Brace Single) with the supported device, so I just mention, they are there.

The problem with most accessories from the power supply range is, that any kind of plugging a cable in or out creates obvious changes in the very delicate balance (or lack thereof) of the potentials, what translated into a more comprehensible language, means that the whole needs to “adapt” itself anew, what makes comparisons of the state “with something” to the state “without something” is very difficult to perform on the fly. Long story short – we listen first with or without an accessory, then we destroy the existing equilibrium and then we listen to the changed state hoping, that the euphoric state caused by the change itself will not cover any true changes introduced by the tested device. It is easier with the BBS, because if we do not glue it to the socket/strip/device, then we can just slide it away from the plugs and thus minimize its influence. Of course in ideal conditions we should remove it completely every time, but for the reasons mentioned above, we get less distortion leaving it “loose” on the cable, than unplugging and re-plugging the cable each and every time for the removal.
But let us get to the point. The presence of the Furutech NCF Booster Brace-Single is manifested not only by pleasant looks, but mostly by an undeniable and very clear influence on the system/device it will work with. Additionally, the intensity of its influence is … reversely proportional to the class of the confection of the cables. Reverse? Yes, yes, this is not an error. The lower the class of the plug the BBS will be paired with, the more its effect will be pronounced and positive. So can the users of top plugs like the 50’s from Furutech just forgo the rest of the review and forget about it? Absolutely not, because, typically for High-End, although the increases of quality are much less than in the lower categories, yet the main fight is for those minute changes, just like in F1. And I am not writing this just to fill this text with more words, but based on my empirical experience, where I applied the tested accessory on the basic 11 (FI-11G/FI-E11G) Organic, the Furutech FP-3TS76s with FI28R/FI-E38R plugs as well as FI-50 NCF(R), the flagship Nanoflux and the Acrolink MEXCEL 7N-PC 9900 using the modified Oyaide P-004e/C-004 plugs. Each and every time the sound changed in repeatable ways, so I will combine and average the results in the upcoming part, hoping, that you, our Honorable Readers, knowing your own systems, will be able to adapt the intensity of the eventual progress to the cables and plugs you use, looking at my description from the perspective of sound you have in your own system at a daily basis.
And so the main domain, where the BBS reigns, is homogeneity and a kind of condensation of the sound. This does not mean, that the volume and scale of the created spectacle is scaled down, but we get better coherence, better defined tissue and palpability. The virtual sources are becoming more “concrete” and real, while the space of the stage remains unchanged. What does this mean? First of all better communicativeness and, what is equally important, brilliant resolution. It was well audible on the live recording “More Never is Enough – Live in Manchester 2010” of the supergroup Transatlantic, created by Neal Morse (Spock’s Beard), Mike Portnoy (Dream Theater), Roine Stolt (Flower Kings) and Pete Trewavas (Marillion), where the recorded material is enchantingly involving and intricately multilayered, but at the same time, at least in context of progressive rock and my opinion, too etheric. Application of the BBS counteracts this lightness by putting some weight, adding body to the instruments, releasing the dynamics and absolutely not taking anything from the air on stage or swing. Well, knowing that drums are manned by Mike Portnoy and the thick strings (bass) are plucked by Pete Trewavas, we subconsciously expect a certain amount of attack on our guts, and not a delicate caress with a peacock feather. And that is given by the Furutech ring. Both the micro and macro dynamic is splendid, so you should not complain, but just let the music spectacle carry you on. Ah yes, I forgot to mention, that the subjective pleasure of listening also improves. Because we automatically switch from analytic to assimilation mode and just swallow the music with our whole body.
I perceive the influence of the tested accessory on a bit lighter genre equally positive. “Vagen” by Tingvall Trio is the quintessence of colder jazz. Instead of cigarette smoke filled club we feel there refreshing freshness, crystal cleanness and space, what on one hand allows us to delight ourselves with the smallest murmurs and admire the composition of the audiophile plankton, but if our system goes a step, or even half a step too far in the direction of being overly analytical, listening can become overly sterile. To this cleanness the BBS introduces a certain amount of, I would not call it fairytale element, but analog coherence.

The Furutech NCF Booster Brace-Single will not make you discover the albums you know by heart anew, or find a completely unknown side to your stereo system. But if you require, that the music that reaches your ears has the refinement and coherence known from reality, or the full spectrum of dynamics, then you should reach out for the tested accessory and check it out in your system. If you did not go too far in terms of density and sticky “musicality”, the NCF Booster Brace-Single can turn out to be the dot on the “i”.

Marcin Olszewski

System used in this test:
– CD/DAC: Ayon CD-35 (Preamp + Signature) + Finite Elemente Cerabase compact
– Network player: Lumin U1 Mini
– Digital source selector: Audio Authority 1177
– Turntable: Kuzma Stabi S + Kuzma Stogi + Dynavector DV-10X5
– Phonostage: Tellurium Q Iridium MM/MC Phono Pre Amp; Musical Fidelity Nu-Vista Vinyl
– Power amplifier: Bryston 4B³
– Loudspeakers: Dynaudio Contour 30 + Brass Spike Receptacle Acoustic Revive SPU-8 + Base Audio Quartz platforms
– IC RCA: Tellurium Q Silver Diamond
– IC XLR: Organic Audio; Vermöuth Audio Reference
– Digital IC: Fadel art DigiLitz; Harmonic Technology Cyberlink Copper; Apogee Wyde Eye; Monster Cable Interlink LightSpeed 200
– USB cables: Wireworld Starlight; Goldenote Firenze Silver; Fidata HFU2
– Speaker cables: Signal Projects Hydra; Vermöuth Audio Reference Loudspeaker Cable
– Power cables: Furutech FP-3TS762 / FI-28R / FI-E38R; Organic Audio Power + Furutech CF-080 Damping Ring; Acoustic Zen Gargantua II; Furutech Nanoflux Power NCF; Acrolink MEXCEL 7N-PC 9900
– Power distribution board: Furutech e-TP60ER + Furutech FP-3TS762 / Fi-50 NCF(R) /FI-50M NCF(R)
– Wall power socket: Furutech FT-SWS(R)
– Anti-vibration platform: Franc Audio Accessories Wood Block Slim Platform
– Switch: Silent Angel Bonn N8
– Ethernet cables: Neyton CAT7+, Audiomica Anort Consequence + Artoc Ultra Reference + Arago Excellence
– Table: Rogoz Audio 4SM
– Acoustic panels: Vicoustic Flat Panels VMT

Opinion 2

What I am going to tell in a moment, can be a kind of shock for many accessory-sceptics and audio-voodoo myth busters. Even more, for people who admit the effect of audio accessories on their system, can also be perplexed. Why? Because to visibly and positively influence the sound of your system, we do not need to use sophisticated feet, different kinds of cabling or even electronics, it is enough to place a ring, manufactured by the Japanese Furutech, on the plug of your power cord, to stabilize it in your wall socket. Impossible? I must confess, that when the representative of the mentioned manufacturer sent us this contraption for testing, after recovering from the initial, slight disbelief, I started to think about a plan how to nicely come out of this clinch during writing of the review. Yet things were completely differently, because while I am writing this text I have completely no issues in writing if it works, but in how to tell to you clearly. Are you surprised? This time you absolutely do not need to respond, as I am convinced, you are. So I invite you to read on to find out what happened when the power cable in socket stabilizer, the Furutech NCF Booster Brace-Single, provided by the Katowice based RCM, was applied.

When you look at the pictures attached to this review, the first question that comes to mind is: “What can influence sound in such a small and not very worked out construction as this one?” With the naked eye you can see only a bit of plastic and an elegant ring made of aluminum. And here I might surprise you, as in the Booster we do not find any technology developed in the Silicon Valley, but just a well combined configuration of intermediates. What does this mean? According to the information from the manufacturer, the carcass is made from Nylon resin NCF. Looks simple, but the devils is in the details, as the mentioned construction is not a monolith, but was very cunningly designed. This cannot be seen, but below the nice aluminum, specially profiled brace, there are a few tweaks, already tested by the Japanese engineers with good results. What does vibration have to do with that? A lot, as the whole intent of the Booster is to combat vibration and convert it into heat already on the level of the power cable plugged into the wall socket. How did the designers make this work? Well, they did not re-invent the wheel. They just designed some air chambers, in appropriate placed reinforced the carcass with vertical pillars, made some transversal cuts in other places, profiled the aluminum ring in a special way and – after affixing it to the socket using double-sided adhesive tape – we get a clearly audible, and what is most important, positive influence on the sound of our system. What influence you ask? I will tell you in the next paragraph.

Starting the section about the sonic effect of the inclusion of the Booster in the audio gear I will only mention, that the items I noted during the test, are not just the result of a hallucination created by my tortured brain, but clear influence of the sound confirmed by a few of my colleagues. I do not know how to explain this, but when you pressed the Play button, like with a wave of a magic wand, the music not only opened in the upper midrange, but also gained some nice vividness. It was not in style of mudding of the sound, but you could clearly hear all the ear pleasing information hidden in that part of the spectrum. This was surprisingly phenomenal, as firstly the vocals got much more readable, and secondly, the system avoided painful harshness and emphasizing sibilants even when playing the least well recorded music. But I must underline, that I perceived everything in the esthetic of adding a tad of smoothness into the system, and not injecting it with a muscle relaxant. Of course the sound moved slightly the center of gravity upwards, adding some extra breath to the music and slightly rounding off the edges of the sounds, but those were just symbolic moves, they were not changing the current presentation drastically. But what about specific music titles? With a small “but” in general without any detriments. What does this mean? Usually it did not matter what kind of music landed in the CD drive, were those the productions emphasizing on brutality, like Black Sabbath, which still had the drive expected for that genre, or jazz ballads of Aga Zaryan, being slightly brightened and more ear friendly songs, as every time it was just a small addition to the sound and not a complete change. However in electronic music, the stabilization of the plug in the socket resulted in quieting down of the sound, as it devoted it from any distortion, but it also toned down the squeaks and noises intended to be there. It was nothing like “putting a blanket on your speakers”, but I felt some toning down of those artifacts, something the lovers of that kind of music could whine about. But I think, this would affect only the most orthodox believers, as most reasonable electronic music enjoyers would understand, that the Furutech does not try to kill their music, but just cleans it from any dirt.

As you can see from the text above, the system turns into a gentleman after you apply the Furutech ring into it. Is this bad? Of course not, as the result is not an effect of any interference with the audio signal, but just the stabilization of the plug in the wall socket. This suggests, that in case we have the sound becoming too polite – I mean the music loses all its verve – the system is having issues with resolution, and that what we perceived as brilliantly reproduced artifacts, were just plain distortions now filtered away by the NCF Booster Brace-Single. And I assure you, I am not bending facts. And the more you will defend yourself from this, the more issue you have with the subject matter. How do I know that? I am using a real life explanation of a typical addict, who does not have any issues with his addition. And the addiction is in your case a badly configured audio system.

Jacek Pazio

System used in this test:
– CD transport” CEC TL 0 3.0
– DAC: dCS Vivaldi DAC 2.0
– Reference clock: Mutec REF 10
– Reclocker: Mutec MC-3+USB
– Shunyata Research Sigma CLOCK
– Shunyata Sigma NR
– Preamplifier: Robert Koda Takumi K-15
– Power amplifier: Gryphon Audio Mephisto Stereo
– Integrated amplifier: Accuphase E800
– Loudspeakers: Trenner & Friedl “ISIS”, Dynaudio Contour 60
– Speaker Cables: Tellurium Q Silver Diamond
– IC RCA: Hijri „Million”, Vermouth Audio Reference
– IC XLR: Tellurium Q Silver Diamond
– Digital IC: Harmonix HS 102
– Power cables: Harmonix X-DC 350M2R Improved Version, Furutech NanoFlux NCF Furutech DPS-4 + FI-E50 NCF(R)/ FI-50(R), Hijiri Nagomi; Vermouth Audio Reference Power Cord
– Table: SOLID BASE VI
– Accessories: Harmonix TU 505EX MK II, Stillpoints ULTRA SS, Stillpoints ULTRA MINI, antivibration platform by SOLID TECH, Harmonix AC Enacom Improved for 100-240V, Harmonix Room Tuning Mini Disk RFA-80i
– Power distribution board: POWER BASE HIGH END
– Acoustic treatments by Artnovion
Analog stage:
Drive: SME 30/2
Arm: SME V
Cartridge: MIYAJIMA MADAKE
Step-up: Thrax Trajan
Phonostage: RCM THERIAA

Polish distributor: RCM
Manufacturer: Furutech
Price: 635 PLN

Technical details
Dimensions (W x L x H): 54.3 x 64.8 x 38.5mm
Weight: 67.5g

  1. Soundrebels.com
  2. >
  3. Booster

Furutech NCF Booster Brace-Single

Opinia 1

Choć na przestrzeni ostatnich dwóch lat z okładem mieliśmy okazję nie tylko sami rzucić uchem, lecz również podzielić się z Państwem wrażeniami związanymi z wpływem dedykowanych przewodom akcesoriów antywibracyjnych figurującym w portfolio Furutecha pod postacią członków rodziny Boosterów, to tak naprawdę nad eliminacją pasożytniczych drgań i innych szkodliwych interferencji Japończycy pracowali już zdecydowanie wcześniej. Nie wiem, czy Państwo pamiętają, ale już latem 2012 r., czyli niemalże osiem lat temu światło dzienne ujrzał, wywołując niemałe zamieszanie, niepozorny „pierścionek” CF-080 Damping Ring. Prawdę powiedziawszy biorąc go na redakcyjny tapet nie spodziewałem się dwóch rzeczy – skali poprawy jaką jego obecność w moim ówczesnym systemie przyniosła i zdecydowanie bardziej imponującej fali hejtu jaką przypuścili audiosceptyczni troglodyci odsądzając nie tylko mnie, lecz również samego producenta, od czci i wiary. Pech chciał, że co bardziej zajadli i zatwardziali w swej niewierze oponenci z czystej złośliwości pocięli znalezione na podorędziu „gazrurki” założyli takowe, lapidarne polepszacze, które zgodnie ze stanem ich (nie)wiedzy działać prawa nie miały, na wtyki przewodów zasilających w swoich systemach i … o zgrozo coś tam usłyszeli. Jednak nie miejsce to i nie czas na roztrząsanie iście homeryckich starć od wieków spierających się frakcji egzystujących w interesującym nas obszarze percepcji dźwięków wszelakich. Bowiem powyższa retrospekcja miała na celu jedynie uświadomienie niezorientowanej w temacie części naszych Czytelników, iż temat walki z wibracjami w Kraju Kwitnącej Wiśni nie jest niczym nowym a dział R&D Furutecha przez ostatnią niemalże dekadę zdążył nie tylko zgłębić tajniki, jak sobie z owymi anomaliami radzić, lecz również wrócić do podstaw i zaproponować rozwinięcie owego CF-080, czyli będący obiektem niniejszej recenzji NCF Booster Brace-Single.

Furutech NCF Booster Brace-Single prezentuje się nadspodziewanie normalnie i mało absorbująco tak pod względem swoich gabarytów, wagi, jak i aparycji. Ot zamknięty z obu stron plastikowymi kształtkami aluminiowy profil. Prawdę powiedziawszy już CF-080 wydawał się bardziej „biżuteryjnym” bibelotem. Jak to jednak w życiu bywa pozory mylą i nasz dzisiejszy gość, podobnie z resztą, jak jego boosterowe rodzeństwo, czyli wtyczkowa podpórka NCF Booster i przewodowy NCF Booster Signal pod pozornie cywilną skorupą kryje całkiem sporą litanię autorskich rozwiązań. Przykładowo „zwykły” plastikowy korpus to nic innego jak autorska żywica NCF (Nano Crystal² Formula) złożona z ceramicznych nanocząsteczek i proszku węglowego, posiadająca zdolność generowania eliminujących ładunki elektrostatyczne jonów ujemnych, oraz zamieniająca energię cieplną w daleką podczerwień. Właściwości antywibracyjne pełnią również stosowne nacięcia na powierzchniach frontowych owej wywiniętej wytłoczki. Ściany boczne to z kolei specjalnie piaskowany i anodowany aluminiowy profil, pod którym ukryto komorę powietrzną, za której sztywność odpowiadają filary z NCF-u i poprzeczne, wykonane z tego samego materiału przegrody. O ponadnaturalnych właściwościach umieszczonych na powierzchni styku BBS-a (Booster Brace-Single’a) z gniazdem/urządzeniem przylepców nic mi nie wiadomo, więc jedynie wspomnę o ich obecności

Z większością akcesoriów operujących w obszarze zasilania jest ten problem, że jakikolwiek wypięcie/przepięcie przewodu powoduje oczywiste zmiany w niezwykle delikatnej równowadze (bądź jej braku) potencjałów, czyli przekładając to na język zrozumiały dla ogółu, całość musi się od nowa „układać”, a tym samym porównania pomiędzy stanem „z czymś” i bez owego „czegoś” szalenie trudno wykonać „w locie”. Krótko mówiąc słuchamy najpierw z lub bez danego akcesorium, potem burzymy istniejącą równowagę i słuchamy bez/z licząc w cichości ducha, że euforia wynikająca z ze zmiany per se nie przesłoni ewentualnych – rzeczywistych zmian prowadzanych przez dane ustrojstwo. Całe szczęście z BBS-em jest łatwiej, gdyż o ile go nie przykleimy do gniazda ściennego/listwy/urządzenia to do woli możemy nim przesuwać po przewodzie a tym samym, poprzez odsuwanie go od wtyków minimalizować jego wpływ. Oczywiście w warunkach idealnych każdorazowo wypadałoby go usuwać, jednakowoż ze względu na powyżej przedstawione argumenty mniejsze przekłamania uzyskujemy zostawiając go na kablu „luzem” aniżeli wypinając ów kabel w celu zdjęcia BBS-a.
Jednak ad rem. Swoją obecność Furutech NCF Booster Brace-Single manifestuje nie tylko całkiem przyjemną prezentacją natury wizualnej, co przede wszystkim niezaprzeczalnym i niezwykle czytelnym wpływem na system/urządzenie z jakim przyjdzie mu współpracować. W dodatku intensywność jego wpływu jest … odwrotnie proporcjonalna do klasy konfekcji. Odwrotnie? Tak, tak, to nie pomyłka, gdyż im niższej klasy wtyk przyjdzie BBS-owi dopieszczać, tym efekt będzie bardziej oczywisty i jednoznacznie pozytywny. Czy w takim razie można stwierdzić, iż posiadacze topowych wtyków w stylu 50-ek Furutecha mogą sobie dalszą lekturę darować i zapomnieć o temacie? Otóż w żadnym wypadku, gdyż jak to w High-Endzie bywa, choć przyrosty jakościowe są nieporównywalnie mniejsze niżeli w niższych kategoriach, to właśnie o te tysięczne części, niczym w F1, toczy się najbardziej zażarta walka. I nie piszę tego, dla samego pisania – lania wody, lecz opierając się na osobistych doświadczeniach natury empirycznej, gdyż podczas testów oprócz uzbrojonego w podstawowe 11-ki (FI-11G / FI-E11G) Organica tytułowe akcesorium aplikowałem na Furutechy FP-3TS762 z konfekcją FI-28R / FI-E38R, jak i Fi-50 NCF(R), flagowego Nanofluxa, czy też Acrolinki MEXCEL 7N-PC 9900 bazujące na autorsko modyfikowanych Oyaide P-004e/ C-004. Za każdym razem dźwięk podlegał powtarzalnym zmianom, więc dalszą część pozwolę sobie niejako uśrednić jednocześnie licząc na to, iż nasi Szanowni Czytelnicy – znając potencjał własnych systemów z łatwością dopasują stopień intensywności ewentualnego progresu do „stanu posiadania”, czyli po prostu spojrzą na moje trzy po trzy przez pryzmat dźwięku, z którym na co dzień obcują.
I tak, główną domeną, w której BBS króluje jest homogenizacja i niejako kondensacja przekazu. Nie oznacza to bynajmniej, że wolumen i skala kreowanego spektaklu ulega przeskalowaniu w dół, czyli mówiąc wprost pomniejszeniu, lecz osiągamy efekt lepszej zwartości, zdefiniowania tkanki i namacalności. Źródła pozorne stają się bardziej „konkretne”, realne i rzeczywiste a jednocześnie „kubatura” sceny pozostaje niezmienna. Co to oznacza? Przede wszystkim lepszą komunikatywność i co równie istotne wzorową rozdzielczość. Świetnie słychać to na koncertowym albumie „More Never Is Enough – Live in Manchester 2010” supergrupy Transatlantic, w skład której wchodzą Neal Morse (Spock’s Beard), Mike Portnoy (Dream Theater), Roine Stolt (Flower Kings) i Pete Trewavas (Marillion), gdzie materiał jest urzekająco wciągający i misternie wieloplanowy, lecz jednocześnie, przynajmniej jak na progresywnego rocka, przynajmniej w moim mniemaniu, zbyt zwiewny i eteryczny. A aplikacja BBS-a ową lekkość równoważy dociążając i konkretyzując – dając body instrumentom, uwalniając dynamikę i nic a nic nie zabierając z napowietrzenia sceny i rozmachu. W końcu wiedząc, że za perkusją zasiada sam Mike Portnoy a „grube struny” (basowe) szarpie Pete Trewavas podświadomie oczekujemy odpowiedniej dawki uderzeń na trzewia a nie delikatnego łaskotania pawim piórkiem. I to najnowszy „pierścionek” Furutecha zapewnia. Dynamika tak w skali mikro, jak i makro jest wyborna, więc nie ma co marudzić, tylko oddać się muzycznej uczcie. A właśnie, zapomniałem wspomnieć, iż poprawia się również czysto subiektywna przyjemność odsłuchu. Zupełnie mimochodem przestawiamy się bowiem z trybu analizy w tryb asymilacji i chłoniemy otaczającą nas muzykę całym sobą.
Równie pozytywnie odbieram wpływ tytułowego akcesorium na nieco lżejszy gatunkowo repertuar. „Vägen” Tingvall Trio to kwintesencja chłodniejszej odmiany jazzu. Zamiast mrocznego, zadymionego klubu czuć tam orzeźwiającą świeżość, krystaliczną czystość i przestrzeń, co z jednej strony pozwala się delektować nawet najmniejszym szmerem i podziwiać konsystencję audiofilskiego planktonu, jeśli jednak nasz system pójdzie chociaż o krok, pół kroku za daleko w stronę zbytniej analityczności, odsłuch może nosić znamiona nieco przesadzonej sterylności. Tymczasem BBS do owej krystaliczności wprowadza może nie tyle element „baśniowy” (niczym spożywanie procentów u Jana Himilsbacha), co nutkę analogowej koherencji.

Furutech NCF Booster Brace-Single nie sprawi, że znane na pamięć albumy zaczniecie poznawać Państwo na nowo, bądź poznacie swój system od zupełnie nieznanej do tej pory strony. Jeśli jednak oczekujecie Państwo od dobiegającej Waszych uszu muzyki wyrafinowania i zgodnej ze znaną z rzeczywistości koherencji, czy też pełnego spektrum dynamiki z czystej ciekawości sięgnijcie po tytułowe akcesorium i sprawdźcie je u siebie. O ile tylko zbyt daleko nie zabrnęliście w gęstość i lepką „muzykalność” NCF Booster Brace-Single może okazać się przysłowiową kropką nad „i”.

Marcin Olszewski

System wykorzystany podczas testu
– CD/DAC: Ayon CD-35 (Preamp + Signature) + Finite Elemente Cerabase compact
– Odtwarzacz plików: Lumin U1 Mini
– Selektor źródeł cyfrowych: Audio Authority 1177
– Gramofon: Kuzma Stabi S + Kuzma Stogi + Dynavector DV-10X5
– Przedwzmacniacz gramofonowy: Tellurium Q Iridium MM/MC Phono Pre Amp; Musical Fidelity Nu-Vista Vinyl
– Końcówka mocy: Bryston 4B³
– Kolumny: Dynaudio Contour 30 + podkładki Acoustic Revive SPU-8 + kwarcowe platformy Base Audio
– IC RCA: Tellurium Q Silver Diamond
– IC XLR: Organic Audio; Vermöuth Audio Reference
– IC cyfrowe: Fadel art DigiLitz; Harmonic Technology Cyberlink Copper; Apogee Wyde Eye; Monster Cable Interlink LightSpeed 200
– Kable USB: Wireworld Starlight; Goldenote Firenze Silver; Fidata HFU2
– Kable głośnikowe: Signal Projects Hydra; Vermöuth Audio Reference Loudspeaker Cable
– Kable zasilające: Furutech FP-3TS762 / FI-28R / FI-E38R; Organic Audio Power + Furutech CF-080 Damping Ring; Acoustic Zen Gargantua II; Furutech Nanoflux Power NCF; Acrolink MEXCEL 7N-PC 9900
– Listwa zasilająca: Furutech e-TP60ER + Furutech FP-3TS762 / Fi-50 NCF(R) /FI-50M NCF(R)
– Gniazdo zasilające ścienne: Furutech FT-SWS(R)
– Platforma antywibracyjna: Franc Audio Accessories Wood Block Slim Platform
– Switch: Silent Angel Bonn N8
– Przewody ethernet: Neyton CAT7+, Audiomica Anort Consequence + Artoc Ultra Reference + Arago Excellence
– Stolik: Rogoz Audio 4SM

Opinia 2

To co zaraz wygłoszę, dla wielu akcesoryjnych sceptyków zwanych pogromcami mitów audio-voodoo może okazać się pewnego rodzaju szokiem. Powiem więcej, lekkiego zmieszania może doznać również osobnik całkowicie dopuszczający działanie wszelkiego rodzaju dodatków z działu audio. Co mam na myśli? Otóż aby zauważalnie a przy tym pozytywnie wpłynąć na brzmienie swojego zestawu, nie musimy już stosować wymyślnych podstawek, różnego rodzaju okablowania, a nawet elektroniki, wystarczy założyć na sieciówkę wyprodukowany przez japońskiego Furutecha pierścionek stabilizujący wtyk w gnieździe ściennym. Niemożliwe? Przyznam, że gdy przedstawiciel ww. producenta podesłał nam to ustrojstwo do zaopiniowania, po otrząśnięciu się ze wstępnego, lekkiego niedowierzania, w duchu obmyślałem plan, jak zgrabnie wybrnąć z tej sytuacji przed Wami podczas pisania relacji z odsłuchów. Tymczasem sprawy potoczyły się diametralnie inaczej, bowiem gdy kreślę te słowa, nie mam problemu z napisaniem „czy to działa”, tylko jak w miarę strawnie, a przy tym jasno to wyłożyć. Zaskoczeni? Nie musicie odpowiadać, gdyż tym razem jestem pewny, że tak. Dlatego też po wiedzę co wydarzyło się po zastosowaniu dystrybuowanego przez katowicki RCM, tytułowego stabilizatora wtyku prądowego w gnieździe ściennym, bądź jakimkolwiek innym, Furutech NCF Booster Brace-Single, bez sztucznego tworzenia atmosfery tajemniczości zapraszam do lektury poniższego tekstu.

Obserwując załączone fotografie pierwszym nasuwającym się pytaniem jest: „Co w tak małej i niezbyt rozbudowanej technicznie konstrukcji jest w stanie wpłynąć na dźwięk?” Przecież gołym okiem widać jedynie trochę tworzywa sztucznego i estetyczny pierścionek z aluminium. I tutaj Was zaskoczę, gdyż w rzeczonym Boosterze nie znajdziemy technologii rodem z Doliny Krzemowej, a jedynie umiejętnie dobraną konfigurację wspomnianych półproduktów. To znaczy? Idąc za informacjami producenta korpus wykonano z żywicy nylonowej NCF. Niby prosta sprawa, jednak jak to zazwyczaj bywa, diabeł tkwi w szczegółach, gdyż wspomniana konstrukcja nie jest monolitem, tylko została bardzo sprytnie zaprojektowana. Niestety tego nie widać, jednakże pod aluminiową, specjalnie wyprofilowaną obrączką, japońscy inżynierowie zastosowali kilka sprawdzonych w walce z wibracjami tweaków. Co ma do tego temat wibracji? Otóż bardzo wiele, gdyż cała praca tytułowego Boostera skierowana jest na walkę z nimi już na poziomie wtyku ściennego zamierzenie zamieniając je w ciepło. Jak to zadanie projektanci wprowadzili w życie? Spokojnie, nie wymyślili po raz kolejny koła. Wystarczyło zaplanować kilka komór powietrznych, w odpowiednich miejscach wzmocnić ścianki korpusu pionowymi filarami, w innych poprzecznie go ponacinać, na wszystko nałożyć przywołany, również odpowiednio wyprofilowany antywibracyjnie aluminiowy pierścień i po aplikacji takiego produktu w swój tor audio – przyklejamy stosownymi dwustronnymi taśmami do gniazda – otrzymujemy bardzo dobrze słyszalny, co najważniejsze, pozytywny wpływ na dźwięk naszego zestawu. Jaki? O tym w kolejnym akapicie.

Rozpoczynając akapit o wyniku sonicznym aplikacji Boostera w tor audio zaznaczę jedynie, iż to, co wynotowałem podczas testu, nie jest będącym konsekwencją zmęczenia mojego mózgu omamem, tylko potwierdzonym przez kilku znajomych wyraźnym wpływem na dźwięk. Nie wiem, jak to wytłumaczyć, ale po wciśnięciu guzika PLAY, muzyka jak za dotknięciem czarodziejskiej różdżki nie tylko otworzyła się w wyższej średnicy, ale dodatkowo nabrała fajnej plastyki. Nie w stylu zamulenia dźwięku, tylko wyraźnie słychać było bardziej przyjazne dla ludzkiego ucha wszelkiego rodzaju zawarte w tym pasmie informacje. To było zaskakująco zjawiskowe, gdyż dzięki temu po pierwsze – znacznie lepiej w domenie czytelności wypadała wokaliza, a po drugie – zestaw podczas odtwarzania nawet w najsłabszych realizacji płytowych konsekwentnie trzymał się zasad kindersztuby, czyli po przełożeniu z polskiego na nasze, unikał bolesnych szorstkości i nadmiernego epatowania sybilantami. Ale zaznaczam, całość odbierałem w estetyce tchnięcia w zestaw szczypty gładkości, a nie stanu po zażyciu Pavulonu. Rzecz jasna, przekaz delikatnie przesuwał środek ciężkości w górę dodając tym sposobem nieco oddechu odtwarzanej muzyce i delikatnie zaokrąglając krawędzie dźwięków, jednak były to działania symboliczne, a nie brutalnie zmieniające dotychczasową prezentację. Co na to konkretna muza? Z małym ale, bez większych szkód. Co to oznacza? Zazwyczaj nie było znaczenia, czy w napędzie CD-ka lądowały produkcje stawiające na brutalność w stylu Black Sabbath, które nadal odznaczały się ważnym dla tego typu twórczości drivem, czy w eterze sączyły się jazzowe ballady spod znaku Agi Zaryan, jako lekko doświetlone i przyjemniejsze dla ucha songi, gdyż za każdym razem było to doprawienie dźwięku, a nie jego brutalne przewartościowanie. A co z tym „ale”? Spokojnie, również bez jakiś drastycznych strat. Jednakże w muzyce elektronicznej niesiony stabilizacją wtyczki w gniazdku ściennym, a przez to uspokajający przekaz muzyczny, bo pozbawiony zniekształceń sznyt grania zestawu, w pakiecie sonicznym powodował minimalne ukulturalnienie przecież zamierzonych w tego typu zapisach nutowych, zniekształceń i pisków. Nie było oczywiście przysłowiowego kocyka, jednak wyraźnie wyczuwałem lekkie ugładzenie wspomnianych artefaktów, na co wielbiciele wyniszczającej ich słuch muzyki mogliby ponarzekać. Jednak zaznaczam, temat dotyczy jedynie zatwardziałych ortodoksów, gdyż już stąpający po ziemi rozsądni piewcy komputerowej muzyki bez problemów zrozumieją, że Furutech nie zabija ich ulubionych kawałków, tylko zamierzenie oczyszcza je z brudu.

Jak wynika z powyższego wywodu, po aplikacji tytułowego pierścionka Furutecha system zmienia się w dżentelmena. To źle? Naturalnie nie, gdyż wynik dźwiękowy nie jest wypadkową ingerencji w sygnał audio, tylko stabilizacji wtyczki w gniazdku. To zaś pozwala sugerować, że w momencie zbytniego ukulturalnienia przekazu – przykładowo muzyka zbytnio straciła wigor – system ma problemy z rozdzielczością, a to co uważaliśmy za zjawiskowo odtwarzane artefakty, było zwyczajnymi, teraz wyeliminowanymi przez NCF Booster Brace-Single zniekształceniami. Naciągam fakty? Zapewniam, że nie. A im bardziej będziecie się przed tym bronić, tym większy z owym tematem macie problem. Po czym tak wnioskuję? Posiłkuję się zaczerpniętym z życia tłumaczeniem typowego nałogowca, który oficjalnie nigdy nie ma z daną używką – w Waszym przypadku źle skonfigurowanym systemem – żadnych problemów.

Jacek Pazio

System wykorzystywany w teście:
– źródło: transport CEC TL 0 3.0
– przetwornik cyfrowo/analogowy dCS Vivaldi DAC 2.0
– zegar wzorcowy Mutec REF 10
– reclocker Mutec MC-3+USB
– Shunyata Research Sigma CLOCK
– Shunyata Sigma NR
– przedwzmacniacz liniowy: Robert Koda Takumi K-15
– końcówka mocy: Gryphon Audio Mephisto Stereo
– wzmacniacz zintegrowany: Accuphase E800
Kolumny: Trenner & Friedl “ISIS”, Dynaudio Contour 60
Kable głośnikowe: Tellurium Q Silver Diamond
IC RCA: Hijiri „Million”, Vermouth Audio Reference
XLR: Tellurium Q Silver Diamond
IC cyfrowy: Harmonix HS 102
Kable zasilające: Harmonix X-DC 350M2R Improved Version, Furutech NanoFlux NCF, Furutech DPS-4 + FI-E50 NCF(R)/ FI-50(R), Hijiri Nagomi, Vermouth Audio Reference Power Cord
Stolik: SOLID BASE VI
Akcesoria:
– antywibracyjne: Harmonix TU 505EX MK II, Stillpoints ULTRA SS, Stillpoints ULTRA MINI
– platforma antywibracyjna SOLID TECH
– zasilające: Harmonix AC Enacom Improved for 100-240V
– akustyczne: Harmonix Room Tuning Mini Disk RFA-80i
– listwa sieciowa: POWER BASE HIGH END
– panele akustyczne Artnovion
Tor analogowy:
– gramofon:
napęd: SME 30/2
ramię: SME V
– wkładka: MIYAJIMA MADAKE
– Step-up Thrax Trajan
– przedwzmacniacz gramofonowy: RCM THERIAA

Dystrybucja: RCM
Cena: 635 PLN

Dane techniczne
Wymiary (S x D x W): 54.3 x 64.8 x 38.5mm
Waga: 67.5g

  1. Soundrebels.com
  2. >
  3. Booster

Furutech NCF Booster English ver.

Link do zapowiedzi (en): Furutech Booster

I don’t know how our meeting today will be viewed by followers of theories like: “all digital audio devices sound the same” or “cabling has absolutely no influence on the sound of a device,” but I should now warn the most nervous audio-voodoo hunters before they start to read this text. What is this all about? For me, this is nothing special, as we will be looking this time not at a cable, but at an accessory for a cable application. But what exactly is it? We will be looking at cable supports, because lately some cables have become very heavy and are pulling the sockets out of our walls and devices . Have I lost my mind? I can assure you that before testing this gadget from the distributor in my own system, I thought I had, but, as it often happens, not everything is as obvious as you might think, and after a few days the ironic grin on my face had disappeared and I was positively surprised. Who played this joke on me? Who could it be? It was none other than the world leader in these types of accessories, the very well-known Japanese company, Furutech, which has introduced to the market a device called the NCF Booster, brought to us for testing by the Katowice-based distributor, RCM.

So what is the Furutech NCF Booster? Looking at it from the top, we see something with the shape of a twisted frog with thin legs. When we start to analyze it from the bottom, we see a base that provides a very good and stable support – the company brochure states that it was made from an ABS resin. Looking up along the rods, which enable the use of the device even up to a height of half a meter, we reach the suspension for the supported plug (made from ABS resin and nylon NCF resin used to eliminate static electricity). As you can see in the photos, located on the sides of the cradle are two very important parts , two screws which enable the user to set the height of the gadget and properly secure it. But this is not all – as on the cable, plug or filter, all supported by the unit, we can place a securing clamp. The latter is made from stainless steel combined with nylon NCF resin. The whole structure is held together by two rubber O-rings, which are not essential if you often move the device after installation. If you just assemble it and leave it, then those two rubber O rings will do the job. To finish this descriptive paragraph, I must explain that when you plan to extend the construction beyond what is supplied in the original package, you must order another set of extenders, which are quite easy to put on because the rods are threaded.

What made me want to describe the influence of this gadget on my audio system? You might be wondering, but the impulse for that was surprisingly clear to me, and what is very important is the positive influence it had on the gear placed on the rack between the speakers. Not that I would complain about my own gear, but frankly speaking, whenever my friends visit me, and without taking into account the great music being played, I begin by directing their attention to my concerns, which are really quite trivial, but are still shortcomings. True, this is nitpicking, but when I manage to improve a certain feature, I show it to them during their next visit. So what was achieved with the use of the tested Booster? This is like a blow to the head. In one second, due to the increase of energy in the reverberation of each of the virtual sound sources on the stage, the readability of the sound improves. The back planes, while staying in their place, gain a certain shine, resulting in the ability to use lower volume levels and still hear with the same clarity. But this is not all that the tested accessory brings to the sound. This clarity is not the result of an improvement of the contours of the instruments by a detrimental thinning of the sound, but instead by the increase in the mass of each of them, and not thickening of the edges. It is just that each phrase is juicier, but still within the boundaries created by the system earlier. Impossible? I didn’t want to believe it at first, but a few tests with music containing excessively heavy bass confirmed the effect I have just described. Is there any catch to it? I do not know if you can describe it this way, as this will depend on the system, the expectations of the listener and the repertoire. It concerns the effect achieved by using additional Furutech supports. Each additional Booster increases the effect in an almost geometrical way. In my system, using a second support was like putting a bit too much icing on the cake. Can I be any clearer? As I mentioned, using the Booster improves the readability of the sound with a very positive reception of its increased energy and contour. But unfortunately, or fortunately, another support placed in front of the line preamplifier almost doubles (more or less) this influence, so listening to quiet music, based on the long decay of the piano sounds or vocals in a church, results in a shortening of the decay time, which translates into a few milliseconds of the sound being lost from its inter-loudspeaker life. This did not happen due to the sound being cut, but knowing the repertoire by heart, I heard the minimal loss of ethereality (it became too blunt) as well as its bearing capability (you could hear something like a cut). But, I would like to remind you that my system, and the music I always play through it, always creates such a romantic atmosphere, that it was easy for me to notice such things. Any other representative of homo sapiens may not even notice it, but those who listen to the strong rhythm of rock, or electronic music, will double their donations to charity after hearing the increase of energy in my Japanese system. Although I used two supports when listening to heavy metal, because I listen mostly to audiophile music, the buying decision only concerned one unit. And, please believe me, I am absolutely not joking. This is the second issue which does not make it easy to classify the increase in the number of those supports. What else can I say? Frankly speaking, I could speak about it for a few more pages, but it’s best to leave it at that.

If somebody knows me, not even personally, but through my writing, then they know that I do not give praise so easily. This naturally suggests that when such gadgets appear, and when they are in some aspect surprising, then there is only one more small step to trap this audiophile and then those things end up in my system. This is also what happened to the Booster. Why it includes only one unit should be clear after reading my text. But you should, as you do not know what will happen when you double the units in your system, ask the distributor to provide you with two pieces for testing. This will cost you nothing, and there is a chance that the system, and the music itself, will be grateful for this doubled effect. To conclude this test, I have one more thing to say which is very important from the point of view of those people who might be interested in this accessory. The influence of the Booster is not only on the NCF family of plugs by Furutech (although in this case the influence will be most visible), but it works with all kinds of plugs, regardless of their manufacturer or the material they were made from. And this, combined with the ease of borrowing items from the distributor for a deposit (or if you know them well – even without a deposit), allows you to test this quite inexpensive device, compared to the cables, and verify for yourself whether what I have written is true. I do not know how this will end, but, rest assured, you will have lots of fun.

Jacek Pazio

Distributor: RCM
Price: 1 690 PLN

System used in this test:
– CD: CEC TL 0 3.0 + Reimyo DAP – 999 EX Limited TOKU
– Preamplifier: Robert Koda Takumi K-15
– Power amplifier: Reimyo KAP – 777
– Loudspeakers: Trenner & Friedl “ISIS”
– Speaker Cables: Tellurium Q Silver Diamond
IC RCA: Hijri „Milon”
XLR: Tellurium Q Silver Diamond
Digital IC: Harmonix HS 102
Power cables: Harmonix X-DC 350M2R Improved Version, Furutech NanoFlux NCF Furutech DPS-4 + FI-E50 NCF(R)/ FI-50(R), Hijiri Nagomi
Table: SOLID BASE VI
– Accessories: Harmonix Beauty Tone Milion Maestro, Harmonix TU 505EX MK II, Stillpoints „ULTRA SS”, Stillpoints ”ULTRA MINI”; antivibration platform by SOLID TECH; Harmonix AC Enacom Improved for 100-240V; Harmonix Room Tuning Mini Disk RFA-80i
– Power distribution board: POWER BASE HIGH END
Analog stage:
– Turntable:
Drive: SME 30/2

  1. Soundrebels.com
  2. >
  3. Booster

Furutech Booster
artykuł opublikowany / article published in Polish
artykuł opublikowany w wersji anglojęzycznej / article published in English

Furutech wprowadzając na rynek Boostera udowadnia, że akcesoria audio to dziedzina sztuki, którą ma opanowaną do perfekcji.

cdn. …